TM 55-2840-254-23
3-14 INSPECT COMBUSTION CHAMBER VANE ASSEMBLY (AVIM)
3-14
INITIAL SETUP
Materials:
None
Applicable Configurations:
All
Tools:
Personnel Required:
68B30 Aircraft Powerplant Inspector
Technical Inspection Tool Kit,
NSN 5180-00-323-5114
1. Inspect four vane segments (1, 2, 3 and 4) as
follows:
Equipment Condition:
Off Engine Task
NOTE
The following inspection applies to four
vane segments. Only one vane segment
is shown.
a. Inspect inner shroud (5) as follows:
(1)
There shall be no chafing wear (6)
deeper than 0.020 inch. There shall be
no cracks in chafed area.
GO TO NEXT PAGE
3-173
