TM 55-2840-254-23
4-13 CLEAN FIRESHIELD ASSEMBLY (Continued)
4-13
1. Wear gloves (E20). Clean fireshield assembly (1)
using methyl ethyl ketone (E36) and brush.
When using compressed air for cleaning,
use approved protective equipment for
eyes and face. Do not use more than 30
psig air pressure. Do not direct air to--
ward yourself or another person. Fail-
ure to comply could result in injury to
eyes or skin. In case of injury, get medi-
cal attention.
2. Wear goggles. Blow dry fireshield assembly
using clean, dry compressed air.
FOLLOW-ON MAINTENANCE:
Inspect Fireshield Assembly (Task 4-14)..
(1)
END OF TASK
4-70
