TM 55-2840-254-23
Section IV. FIRESHIELD SECTION - MAINTENANCE PROCEDURES
4-16 REMOVE FIRESHIELD SECTION
4-16
INITIAL SETUP
Applicable Configurations:
All
Tools:
Powerplant Mechanics Tool Kit,
NSN 5180-00-323-4944
Open-End Wrench (T53)
Materials:
Wiping Rag (E58)
Personnel Required:
68B10 Aircraft Powerplant Repairer
Equipment Condition:
Exit Vane Assembly Removed (Task 4-78)
Tube Assembly (No. 4 and 5 Bearing Scavenge
Connector to Hose Assembly) Removed
(Task 8-56)
Left- and Right-Hand Bus Bar Assemblies
Removed (Task 4-7)
Fireshield Assembly Removed (Task 4-12)
Left- and Right-Hand Fuel Manifold Assemblies
Removed (Task 6-16)
General Safety Instructions:
Lubricating oils (E32 and E33) cause
paralysis if swallowed. Prolonged con-
tact with them may irritate the skin.
Handle only in well-ventilated areas
away from heat and flame. Drain and
store in approved metal safety con-
tainers. Avoid prolonged or repeated
contact with skin and do not take in-
ternally. Wash contacted areas of skin
thoroughly after handling. If irritation
of skin results, get medical attention.
Get medical attention for eyes.
GO TO NEXT PAGE
4-79
