TM 55-2840-254-23
4-40 INSTALL NO. 4 AND 5 BEARING PACKAGE SEALS (AVIM) (Continued)
4-40
Be sure to apply a light coat of lubricat-
ing oil on faceplate before installation.
Failure to comply will cause damage to
aft seal and retainer during dry running
period of initial engine starts.
12. Apply a light coat of lubricating oil (E32 or
E33) on faceplate (31). Align bolt hole (36)
and install aft seal and retainer (37) and three
screws (38).
GO TO NEXT PAGE
4-214