TM 55-2040-254-23
4-78 REMOVE EXIT VANE ASSEMBLY (Continued)
4-78
2. Install mechanical puller (T47) (4) as follows:
NOTE
The following steps a. thru c. apply to
three pullers installed at the 2-o’clock,
6-o’clock, and 10-o’clock positions. Only
2-o’clock position is shown.
a. Back knob (5) counterclockwise, all the way
out, and guide plate (6) through upper vane
slot (7).
b. Rotate arm (8) 90 degrees clockwise.
GO TO NEXT PAGE
4-491
