TM 55-2840-254-23
5-16 INSTALL STARTER DRIVE ASSEMBLY (Continued)
5-16
NOTE
In following step, gearshaft may have
to be rotated slightly to engage splines.
1. Install gearshaft (1) into widest portion of hole
(2). Guide straight in until splines (3) engage
with internal accessory drive gear splines.
2. Install packings (4 and 5) on starter gearbox as-
sembly (6).
3. Install packing (7) in housing assembly (8).
NOTE
In following step, splines may have to
be rotated slightly to engage properly.
4. Engage splines (9) with splines (10). Install
starter drive assembly (6), four washers (11),
and nuts (12).
GO TO NEXT PAGE
5-96