1 September 2011
Figure 6. Seal Locations
25. CONTACTS. The contacts used in SAE
27. POWER CONTACTS. Power contacts are used
AS85028 connectors are crimp rear-removable power
to connect single conductor wire through connectors.
contacts with pull-thru insertion design.
The power contacts are size 16 and are crimp, rear-
release design. Contacts are listed by size. Match the
26. CONTACT APPLICATION. Contacts used are
required size to connector application, wire gage, and
manufactured in accordance with SAE AS39029. The
part number breakdown is illustrated (Figure 8). The
listed along with corresponding color bands (Table 2).
Basic Identification Number (BIN) or last three digits
of contact part number, matches standard resistor color
code (Figure 9).