Figure 6-14. Lateral Feel Spring Cartridge
PILOT CYCLIC STICK HOUSING AND SUPPORT ASSEMBLY (ET).
Description (Figure 6-1. Index No. 15). The pilot cyclic stick housing and support assembly are found at the base
of the pilot's cyclic stick flight control. Check the support and housing.
Defects. This inspection is used to verify crack indications found visually on the pilot cyclic stick, housing and
support assembly. No cracks are allowed.
Primary Method. Eddy Current.
NDI Equipment and Materials. (Refer to Appendix B.)
Eddy Current Inspection Unit
Probe, straight, shielded surface, 100 KHz-500 KHz
Probe, right angle, shielded surface, 100 KHz-500 KHz, 90 °
1/2 inch drop
Reference Block, three-notched aluminum (0.008, 0.020, and 0.040 EDM notches)
Teflon Tape, refer to Table 1-8
Aircraft Marking Pencil, refer to Table 1-8