RAISING HINGED FLOOR
Fold-out floor counterbalance cables must be secured in cable housings prior to
raising shelter floor from its lowered position to its level position. If
counterbalance cables are not secured, counterbalance cables will remain under
tension. DO NOT attempt to remove cables if counterbalance cables are not
secured. Removing cables while under tension could cause SERIOUS INJURY
1. Remove lockout pins (4) from lower position on both cable reels (3).
2. Open slide stops (1) against counterbalance cables (2) on both cable reels (3).
3. Replace lockout pins (4) in upper position on both cable reels (3).
4. Position cam locks so handles are vertical and down for cargo end and vertical and up on personnel end of