2-11. TADS NSA INSTALLATION ON NIGHTSIDE TEST BENCH. (CONT)
Workbench used to support TADS NSA must have a tabletop that extends
at least 3 inches beyond front of bench.
(2) Place TADS NSA on edge of workbench tabletop with mounting flange facing operator.
(3) Aline insert/adapter guide pins (1, figure 2-12) with guide pin holes (2) on TADS NSA
mounting flange. Ensure that insert/adapter is oriented with clamp assembly bolt (3) in the
down position, as shown. Mount insert/adapter to TADS NSA.
(4) Ensure that clamp guide pin is in guide pin alinement hole (4) of insert/adapter and that
insert/adapter mounting surface is flush against TADS NSA mounting surface.
(5) Set torque wrench to 100 in-lb and use torque wrench to tighten clamp assembly. Ensure that
insert/adapter is secured to TADS NSA by checking for no free movement between them.
Figure 2-12. Mounting Insert/Adapter to TADS NSA