a. Stencil engine oil tank with 1/4-in. orange-
yellow letters as shown. NO STEP is located
on top of reservoir, and OIL RESERVOIR is
located near top of tank and centered behind
filler neck. All other markings are as indicated.
b. Paint 1/16 in. orange-yellow lines on OIL
RESERVOIR sight gauges as shown.
HYDRAULIC RESERVOIR INSIDE
Locate aft of reservoir sight gauge on right side
pylon cover, 1/2-in. black letters.
WHEN FLUID LEVEL IS VISIBLE
FILL TO OVERFLOW
Paint black arrows on both sides of engine work
deck pointing to black deck stripes, see code
Stencil inside upper engine cowl both sides to
read correctly when cowl is in open position,
1/2-in. black letters.
TIE DOWN RING
Locate adjacent to mooring points, 4 required,
1/4-in. black letters.
MOORING LOAD ON RING NOT TO EXCEED
1000 LBS VERTICALLY
500 LBS LATERALLY
500 LBS FWD/AFT
Figure 9-37. Exterior Markings, UH-1 D and UH-1 H (Sheet 15 of 17)