TM 55-2840-231-23
6-27. Fuel Filter - Replacement - Continued
FUEL PUMP/ -
Continued
Be sure the element is inserted
with the open end and shoulder
toward the pump and the small
preformed packing firmly seated
against the housing before install-
ing the cover.
7. Element (3)
6-27.1. Pc Air Filter - Removal
INITIAL SETUP
Applicable Configuration
All
ENGINE/
Pc Air Filter
Lockwire (item 17, Appendix D).
Insert new element (3) into
fuel pump (1) and install
cover (5). Tighten cover to
180-200 in. lb, (2.1-2.3
kg/m) and secure wit
h
Lockwire. Bleed the fuel
s y s t e m
.
( R e f e r t
paragraph 6-2.)
Disconnect air tubes (1
and 2) from both ends of
filter (3). Hold the filter
while loosening coupling
nuts (4 and 5). Remove nut
(6) and bolt (7) securing
filter clamp (8) to filter
m o u n t i n g b r a c k e t
R e m o v e f i l t e r a n
separate clamp from the
filter.
Change 7
6-67