2-30 INSTALL STATOR VANE ASSEMBLIES (Continued)
Torque two bolts (20) to 45 inch-pounds.
Torque four bolts (20) to 15 inch-pounds.
Check ends of bolts (20). Bolt ends shall be
flush, or not more than 0.035 inch below
surface of stator. If necessary add washers
under bolt heads. There must be at least one
washer under each bolt head.
Calculate gap between stator vane shrouds as
outlined in step 8.
Lockwire bolts (15) and (20). Use Iockwire
GO TO NEXT PAGE