2-30.1 INSTALL RTV IN FIRST STAGE STATOR VANE ASSEMBLY (Continued)
This task is for first stage stator assemblies P/N
2-101-790-47 and P/N 2-101-790R46.
Procedure for installing upper and lower first
stage stator assembly are the same. Instructions
for installing lower compressor housing first
stage stator vane are given.
Inject RTV in first stage stator vane assembly
(1) as follows:
Acetone (E1) is flammable and toxic. It can
irritate skin and cause burns. Use only in
well-ventilated area, away from heat and
open flame. In case of contact, immediately
flush skin or eyes with water for at least 15
minutes. Get medical attention for eyes.
a. Wear gloves (E20) and using acetone (E1)
and acid swabbing brush (E2) and lint-free
cloth (E26) clean first stage stator mounting
surface (2) of compressor housing half (3).
GO TO NEXT PAGE
C h a n g e