2-30.1 INSTALL RTV IN FIRST STAGE STATOR VANE ASSEMBLY (Continued)
When using compressed air for cleaning, use
approved protective equipment for eyes and
face. Do not use more than 30 psig air pres-
sure. Do not direct air toward yourself or
another person. Failure to comply could
result in injury to eyes or skin. In case of
injury, get medical attention.
b. Wear goggles. Blow dry first stage stator
mounting surface (2) using dean, dry
c. Mask compressor housing half (3) using
one inch wide
masking tape (E54) (4) leaving
first stage stator vane assembly mounting
surface (2) unmasked.
GO TO NEXT PAGE