2-30.1 INSTALL RTV IN FIRST STAGE STATOR VANE ASSEMBLY (Continued)
Install first staqe stator vane retainers. detail
of RTV masking kit (T36.1) as follows:
(1) Install aft retainer (15) with chamfered
edge of (16) toward first stage stator vane
(2) Install forward retainer (18) with cutouts
toward first stage stator vane (17).
Make sure forward and aft retainers are tightly
secured against first stage stator vane.
(3) Install two clamps (19) and four screws
(20). Tighten screws evenly to clamp
retainers in place.
GO TO NEXT PAGE
C h a n g e