4-19 INSTALL FIRESHIELD SECTION (Continued)
Concave side of washer must face fire-
shield section. Failure to comply will
place wrong tension on internal oil
tube. This may cause damage to oil tube.
Do not tighten reducer in following
step. Tightening of reducer may damage
internal oil tube.
3. Remove reducer (5). Loosely install shim (7),
washer (8), concave side up, and reducer (5).
Adapter must be held firmly when
tightening reducer. Failure to comply
will cause damage to internal tube as-
4. Hold adapter (6) with open-end wrench (T53)
(9). Torque reducer (5) to 115 inch-pounds.
GO TO NEXT PAGE