2-11. T74 Turboprop Hose and Cable Connections - continued.
9, figure 2-44
Connect jack No. 1 to water brake
water supply thermocouple.
Connect jack No. 2 to water brake
Connect jack No. 3 to water brake
No. 1 (aft) bearing thermocouple at
the 5 o'clock position.
Connect jack No. 4 to water brake
No. 2 (forward) bearing thermocouple
at the 6 o'clock position.
J8, data acquisition assembly
10, figure 2-44
generator (if installed).
Connect P4 to igniter.
Connect P5 to oil temperature bulb.
Connect P6 to chip detector.
J7, data acquisition assembly
11, figure 2-44
Connect to torque element cable
assembly to facilitate calibration of
torque system. Remove prior to
element cable assembly.
J12, data acquisition assembly