TM 1-1500-204-23-3
WARNING
When working with Alodine 1200
wear gloves, safety goggles, and
protective
clothing.
Wear
a
NIOSH approved respirator. If
contact occurs, flush with water
and get medical attention.
CAUTION
If artist's brush has metal bristle
retainer, wrap the retainer with
two layers of masking tape so all
of the retainer is covered.
8
Apply, brush Alodine 1200 coating
(item 14, table 2-11) liberally to the metal surface using
artist brush (item 15, table 2-11) or equivalent and allow
to stand one (1) minute.
9
Apply additional coats of Alodine
1200 (item 14, table 2-11) at one (1) minute intervals
until a light gold or tan color appears. No more than five
(5) coats are required for coating formation. If no
coating occurs, reclean the surface and reapply Alodine
1200 (item 14, table 2-11).
CAUTION
Wash the brush thoroughly in
water immediately after use, as
the Alodine 1200 will attack the
bristles.
10
Rush the work area thoroughly with
distilled water (item 11, table 2-11) followed by wiping
with a clean piece of dean cheesecloth (item 16, table 2-
11).
Table 2-11. Expendable/Durable Supplies and Materials List
(1)
(2)
(3)
(4)
(5)
ITEM
NATIONAL STOCK
DESCRIPTION
UNIT OF MEASURE
NUMBER
LEVEL
NUMBER
U/M
1
F
8040-01-129-2559
Adhesive
PT
P/N 82C18
2
F
8040-01-129-2558
Adhesive
PT
P/N 82C12
3
F
6810-00-184-4796
Acetone, Technical
GL
O-A-51 (81348)
4
F
8415-00-2668677
Gloves, Chemical Protective
EA
ZZ-G-381 (81348)
5
F
6515-00-753-4533
Tongue Depressor
EA
GG-D-226 (81348)
6
F
7920-00-514-2417
Brush, Acid Swabbing
EA
A-A-289 (58536)
7
F
9330-01-434-0772
Plastic Material, Interior and Exterior
YD
P/N 3629N (56221)
8
F
9330-01-434-7186
Plastic Material
YD
PIN 3603N (56221)
Change 2 2-66
