NAVAIR 01-1A-505-2
009 02
TO 00-25-255-1
Page 2
TM 1-1500-323-24-2
NOTE
Support Equipment Required
As all NAVAIR connector and accessory
Part No./
Nomenclature
documents are transitioned to non-
Type Designation
government standards, the Society of
M2520/1-01
Tool, Crimp, Frame
Automotive Engineers (SAE), will become the
AU2520/1-02
Positioner
preparing activity and the Navy will adopt
M2520/2-01
Tool, Crimp, Frame
the documents, the drawing number prefix
M22520/2-24
Positioner
will change from MS to AS. The main part
M22520/2-33
Positioner
number designation remains the same, with
M22520/3-1
Gage, Inspection
the "M" prefix, such as M81511/17-08. At times
M81969/14-02
Tool, Insertion
the entire item may be superseded by another.
M81969/14-03
Tool, Insertion
There are many cases where documents have
M81969/14-04
Tool, Insertion
been cancelled without replacements, each
M81969/17-03
Tool, Insertion
case was reviewed and some information has
M81969/17-04
Tool, Insertion
been retained in this volume "for reference use
M81969/17-05
Tool, Insertion
only".
M81969/17-06
Tool, Insertion
M81969/19-03
Tool, Removal
3. DESCRIPTION. The coupling ring of these
M81969/19-07
Tool, Removal
threaded and bayonet type connectors is mounted on
M81969/19-08
Tool, Removal
the plug shell and assists in mating and unmating
M81969/19-09
Tool, Removal
contacts as the coupling ring is tightened or loosened.
Complete mating of threaded types occurs when the
Materials Required
plug shell bottoms against the receptacle shell. The
connector inserts are designed to positively lock the
Specification/
Nomenclature
contacts in place. Insert arrangements for individual
Part No.
connectors are shown for each connector part number.
None
The contacts are rear inserted and front release, rear
removable. Disengagement of the connector is
necessary only when removing contacts from
1. INTRODUCTION.
connector.
2. This Work Package (WP) pertains to connectors
4. MIL-DTL-26500.
manufactured in accordance with MIL-DTL-26500.
They are capable of withstanding operating
5. MIL-DTL-26500 connectors are miniature, circular,
temperatures to 392F (200C). The connectors prevent
environment resistant, with front-release, rear
pin or socket damage during normal mating of
removable crimp contacts (Figure 1). Hermetic
counterpart connectors. Integral keys and keyways in
shell of connector prevents engagement of contacts
until they are properly aligned.
6. GROMMET SEALING PLUGS. The grommets of
environment resisting connectors are designed to
accept sealing plugs in accordance with MS27488 to be
used where unwired contacts are placed. The connector
when ordered as a unit will have sealing plugs enclosed
to equal 15 percent of the number of contacts but not
less than three.