NAVAIR 01-1A-505-3
TO 1-1A-14-3
TM 1-1500-323-24-3
002 00
1 September 2011
Page 2
8.
REQUISITIONING AND AUTOMATIC
21. Warnings, Cautions, and Notes are used
DISTRIBUTION.
throughout this manual. They are defined as follows:
9.
Procedures to be used by Naval activities and
other Department of Defense activities requiring
NAVAIR technical manuals are defined in NAVAIR
00-25-100.
An operating or maintenance procedure, practice,
10.
QUALITY ASSURANCE.
condition, statement, etc., which, if not strictly
observed, could result in injury to, or death of
11. Maintenance procedure steps, essential to
personnel.
equipment performance or to the safety of personnel,
are highlighted by the addition of the abbreviation
(QA) following the procedure. Quality Assurance
action shall be taken on all steps designated (QA)
prior
to proceeding to the next step.
An operating or maintenance procedure, practice,
condition, statement, etc., which, if not strictly
12.
SUPPORT EQUIPMENT REQUIRED.
observed, could result in damage to, or
destruction of, equipment or loss of mission
13.
Each individual WP identifies the support
effectiveness.
equipment required to maintain the components
covered within it. When alternate repair procedures
NOTE
exist, different tools may be required. Where
possible, the alternate tools are identified.
An essential operating or maintenance
procedure, condition, or statement, which must
14. CONSUMABLE MATERIALS
be highlighted.
REQUIRED.
22.
GENERAL SAFETY PRECAUTIONS. The
15.
Each individual WP identifies the consumable
following general safety precautions shall apply:
materials required to maintain the components
covered within it. The materials required for each
a. Observe and follow all written safety
maintenance task are listed in the corresponding WP.
precautions while performing procedures given in the
When alternate repair procedures exist, different
methods of this and other work packages contained
materials may be required. Where possible, the
within this manual.
alternate materials are identified.
16.
b. Observe and adhere to all
REFERENCE MATERIAL.
Warning/Caution/Advisory signs on equipment and
17. Each WP identifies the applicable list of
materials.
reference material required to install, maintain or
repair the applicable rectangular connector and/or
c. Observe and adhere to all Warning
accessory.
/Caution/Advisories/Notes in the applicable
Type/Model/Series aircraft manuals for repair of, and
18.
operational verification of wiring and interconnect
TECHNICAL DIRECTIVES.
systems.
19. A record of applicable technical directives will
also appear in each WP in this manual, but will list
d. The following are general safety precautions
only technical directives that affect the text and
which are not related to any specific procedure and
illustrations of that particular WP.
therefore do not appear elsewhere in this publication.
These are recommended precautions that personnel
20.
WARNINGS, CAUTIONS, AND NOTES.
