TM 1-1510-253-CL
b. Both DCP Range Knobs -- SELECT 10
Mile Range
c. Both DCP Tilt Knobs -- ADJUST to
Display a Return
d. DCP RADAR Button -- SELECT STBY
TCAS
(First flight of the day)
NOTE
Local procedures (e.g. ADIZ, TFR, etc.) may
preclude test completion or require an alter-
nate squawk code to prevent unnecessary
official response.
Either a cockpit speaker or headset is re-
quired to complete this check.
ATC 1 Transponder
Manual Display Mode
1. Pilot's Annunciator Panel -- SELECT ATC
1 XPDR
2. PFD TFC (R3) Line Select Key -- ENSURE
Display OFF
3. CDU Tuning Page -- SET XPDR Code As
Appropriate
4. CDU R6 Line Select Key -- PRESS
5. CDU R2 Line Select Key -- SELECT TEST
NOTE: Red and green advisory bands
on vertical speed scale and red TRAFFIC
advisory below EADI. Note: TFC prompt with
a cyan background adjacent to PFD R3 Line
Select Key and prepare to PRESS PFE R3
Line Select Key.
6. PFD TFC. (R3) Line Select Key -- PRESS
NOTE: four traffic symbols (
)
and LISTEN for "TCAS System Test OK"
audio message.
P-8