TM 1-1520-253-23
Fluorescent Penetrant Method
Fluorescent Penetrant Inspection Kit
Black Light UV Kit
Black Light Meter
Black Light Bulbs
Filter UV
Magnetic Particle Method
Yoke and Coil Kit
Black Light
Magnetic Particle Inspection Probe
Magnetometer
Eddy Current Method
Eddy Current Inspection Unit
Cable, Coaxial 6-feet long (1 required)
Reference Block Aluminum (0.008, 0.020, and 0.040
EDM notches)
Reference Block Titanium (0.008, 0.020, and 0.040 EDM
notches)
Reference Block Magnesium (0.008, 0.020, and 0.040
EDM notches)
Reference Block - Block of Six Conductivity Samples
Probe, right angle, shielded surface 100 KHz-500 KHz
901/2 inch drop
Probe, straight, shielded surface 100 KHz-500 KHz
Ultrasonic Method
Ultrasonic Inspection Unit
Cable, assembly, BNC to microdot
Transducer, contact 1.0 MHz 1/2 inch (two required)
Bond Testing Method
Bond Test Inspection Unit
Cable
Probe, Mechanical Impedance Analysis
Probe Holder, spring loaded
Test Block, Composite Defect Standard #1
Test Block, Composite Defect Standard #3
Test Block, Aluminum Honeycomb with 0.020 inch thick
aluminum/fiberglass skin (refer to Appendix C)
Test Block, Aluminum Honeycomb with 0.040 inch thick
aluminum skin (refer to Appendix C)
Test Block, Aluminum Honeycomb with 0.063 inch thick
aluminum skin (refer to Appendix C)
Radiographic Method
Tripod X-Ray Tubehead Stand
Signal Appliance Lamp Assembly
X-Ray Unit (LPX-160 Water Cooled Digital)
Note: Refer to Appendix B for equipment part number, National Stock Number and manufacturer.
