TM 1-1520-264-23
Table 1-2. Access Provisions - Continued
Item
Number
Item
Access To
CPG Left and Right Console Panels Removal/Installation
CL1
Aft Console
CPG Armored Crew Seat Removed
Panel
CPG Collective Cover Removed
CL3
Lower Aft
ECS Crew Station Valve Removed
Console
Panel
CL5
Center
Console
Panel
CL7
Forward
CPG Armored Crew Seat Removed
Console
CPG Scuff Plate Assembly Removed
Panel
CPG ICS Foot Switch Removed
CR2
Aft Console
Panel
CR4
Center
Helmet Holster Removed
Console
ECS Valve Removed
Panel
CR6
Forward
CPG Armored Crew Seat Removed
Console
CPG Scuff Plate Assembly Removed
Panel
CPG ICS Foot Switch Removed
1.3 MARKING AND/OR RECORDING OF INSPECTION RESULTS.
NOTE
Only approved marking pencils listed in Table 1-8 are to be used for temporary marking of indications
found during an NDI inspection. The color of the markings shall contrast with the color of the part.
a.
Wipe the area to be marked with low-lint cleaning cloth, MIL-C-85043.
b.
Mark surface with appropriate color aircraft marking pencil, MIL-P-83953, using a light touch.
c.
Remove markings as soon as there is no further need for them with a low-lint cloth, MIL-C-85043, dampened
with tap water. It is allowable for a shadow of the marking to remain on surfaces after removal.
1-21
