TM 1-4920-435-13&P
0025 00
Repair
1. Prepare and weld cracked or broken welds in accordance with MIL-STD-2219. Welding repair must not
interfere with form, fit, or function of bracket.
2. A new counterweight bracket can be manufactured from drawing located in WP 0027 00.
3. Paint per instructions given on drawing located in WP 0027 00.
Install
1. Remove hardware from original location.
2. Place new or repaired shearing machine bracket onto shearing machine and insert bolt and flat washer and
tighten.
0025 00-14
