TM 1-4920-435-13&P
0025 00
SHEET METAL SHOP
SHEARING MACHINE
INITIAL SETUP
Tools And Special Tools:
References:
Tool Kit, Power Plant
MIL-STD-2219
Torque Wrench 0-600 in. lbs. (5120-01-530-2311)
Welding Machine (3431-01-507-1712)
Equipment Conditions:
Spoolmatic (3431-01-024-1681)
Functional
Control (3431-01-024-1681)
Regulating Flow Meter (4820-01-086-4310)
Argon Bottle (8120-00-282-8077)
Materials/Parts:
Shearing Machine Bracket Assembly
Shearing Machine Bracket
Shearing Support Bar Bracket
Shear Support Bar Bracket
Flat Washer (WP 0033 00, Figure 10, Item 5)
Lock Washer (WP 0033 00, Figure 10, Item 6)
Plain Hex Nut (WP 0033 00, Figure 10, Item 7)
Hexagon Head Cap Screw
Personnel Required: (1)
CMF 15 Series
15F, Electrical Repairer
44E, Machinist
NOTE
During installation of components the same hardware should be used so as to
maintain the original integrity of the shop sets.
INSPECT
Inspect shearing machine brackets for looseness. If a bracket is loose, follow procedures given in WP 0026 00.
Visually inspect brackets for cracked or broken welds. If welds are cracked or broken bracket must be removed
and repaired. If bracket is damaged beyond repair it must be replaced with a new one. A new shearing machine
bracket can be manufactured from drawing located in WP 0027 00.
0025 00-10
