0018 00
TM 1-4920-438-13&P
Install
1. Install door hasp by using latch handle as a guide to position.
2. Mark position of door hasp.
NOTE
There should be adequate clearance for latch handle to swing around door hasp
without interference.
3. Rotate latch handle out of way and match drill door hasp to door in two places.
4. Deburr all holes and clean off all metal shavings.
5. Position latch and insert two rivets into two holes.
NOTE
Rivets should be dipped or coated in sealing compound before inserting into
drilled holes.
6. Pull rivets to secure door hasp to door.
7. Weld door hasp to door in two places.
8. Prime surface.
9. Apply a bead of sealing compound along remaining two sides of door hasp as well as coating rivet heads with
sealing compound.
10. Paint per specifications located on CARC plate on personnel end, outside of shelter.
End of Work Package
0018 00-8
