TM 1-6625-476-30
5-4
Section III. TEST PROMPTED PROCEDURES
Subject
Para
Page
Control Panel Assembly Removal from Shipping and Storage Container . . . . . . . . . . .
5-9
5-4
Installation of Control Panel Assembly in Shipping and Storage Container . . . . . . . . .
5-10
5-5
5-9. CONTROL PANEL ASSEMBLY REMOVAL FROM SHIPPING AND STORAGE CONTAINER.
WARNING
HEAVY OBJECT
• Excessive strain can cause serious injury.
• Don’t: Attempt to lift or carry heavy objects alone.
• Do: Get help for lifting or carrying heavy objects.
• If you experience a sudden pain while lifting or
• discomfort after lifting, get medical help at once.
NOTE
Two people are required when performing this task.
a. Press container pressure relief valve (1, figure 5-2).
b. Open container latches (2).
c. Remove container lid (3) and set aside in a clean dry area.
d. Carefully remove control panel assembly (4) from container.
CAUTION
EQUIPMENT DAMAGE
The black foam in the shipping container may dry rot over time creating a
dust/powder/grit residue. A potential exists for abrasive damage to optics
and mechanical assemblies and degradation of optical performance.
Inspect and clean assemblies as required.
e. Inspect and remove any dust, black powder, or grit from the control panel assembly before
opening.
f. Replace container lid on container and secure latches.
