TM 1-6625-476-30
7-10
Section III. TEST PROMPTED PROCEDURES
Subject
Para
Page
Television Sensor Assy/Solid State Camera Assy
Removal from Shipping and Storage Container . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7-9
7-10
Installation of Television Sensor Assy/Solid State Camera Assy in
Shipping and Storage Container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7-10
7-12
7-9. TELEVISION SENSOR ASSY/SOLID STATE CAMERA ASSY REMOVAL FROM SHIPPING AND
STORAGE CONTAINER.
WARNING
HEAVY OBJECT
• Excessive strain can cause serious injury.
• Don't: Attempt to lift or carry heavy objects alone.
• Do: Get help for lifting or carrying heavy objects.
• If you experience a sudden pain while lifting or discomfort after lifting, get
medical help at once.
NOTE
Two people are required when performing this task.
a. Press container pressure relief valve (1, figure 7-3).
b. Open container latches (2).
c. Remove container lid (3) and set aside in a clean dry area.
d. Carefully remove camera assembly (4) from container.
CAUTION
EQUIPMENT DAMAGE
The black foam in the shipping container may dry rot over time creating a
dust/powder/grit residue. A potential exists for abrasive damage to optics
and mechanical assemblies and degradation of optical performance.
Inspect and clean assemblies as required.
e. Inspect and remove any dust, black powder, or grit from camera assembly before testing.
f. Replace container lid on container and secure latches.
