TM 10-4930-351-14
0002 00
Auxiliary Pump Module
The auxiliary pump module, figure 13, consists of a 24 vdc electric pump (1) mounted in a tubular frame (2). The pump is
equipped with an on/off switch (3) and two-inch valved unisex couplings (4) at both inlet and outlet. An electrical power
connector (5) allows the pump to be connected to the auxiliary power leg of the battery power cable (W202) from the
accessory module. The auxiliary power cable is 50 ft. (15.24 m) in length, allowing the auxiliary pump to be used anywhere
within a 50 ft. (15.24 m) radius of the accessory module.
4
2
1
4
250_1-15.DS4
5
3
Figure 13. Auxiliary Pump Module
Manual Starter Kit
A manual starter, figure 14, is provided for use in those instances when the electric start system is inoperable due to extreme
cold, weak battery, or physical damage to the system. The manual starter will operate reliably at -5 F. The starter is stowed
and transported in a reusable container, as illustrated below. The starter is mounted on a bracket that allows it to be clamped
to the engine end of the pump-engine module. It interfaces with the engine through a flexible coupling. For use, the starter is
wound by hand and then released by a trip release handle.
Figure 14. Manual Starter
0002 00-13
