TM 10-4930-351-14
0002 00
Table 1. Equipment Data (Continued)
DESCRIPTION
QTY
LEADING PARTICULARS
Engine
1
Deutz Ruggerini Model 191_EPA
Four cycle, air cooled, direct-injected diesel
2 cylinder
Displacement:
52 cu. In. (851 cm3)
Output (max):
19 HP (19.27 HP) @ 3400 RPM
Torque (max):
29.9 ft. lbs. (40.5 nm) @ 2400 RPM
Compression Ratio:
19:1
Dry Weight:
147 lb (66.68 kg)
Oil Capacity:
1.9 qts. (1.8 ltrs.)
Fuel Capacity:
1.2 gal. (4.5 ltrs.)
Fuel Transfer
1
Weight:
39 lb (17.7 kg)
Pump
Operating Temperature Range:
120F (48.9C) to 25F (-31.7C)
Flow Rate: 265 gpm (60 m3/hr) minimum rating
Liquid Fuel
1
Weight (dry):
approx. 137 lb (62.1 kg)
Filter-Separator
Weight (drained):
approx. 147 lb (66.7 kg)
Weight (full):
317 lbs (143.8 kg)
Length:
55 in (1397 mm)
Width:
20 in (508 mm)
Height:
24 in (609.6 mm)
Accessory Module
1
Weight:
132 lb (59.9 kg) with battery installed
w/o Battery: 51.92 lb (23.5 kg)
Battery: 80.08 lb (36.4 kg)
Length:
40.25 in (1022.4 mm)
Width:
21.75 in (552.5 mm)
Height:
22.00 in (558.8 mm)
Auxiliary Pump
1
Weight:
32 lb (14.5 kg)
Module
Pump Assembly,
1
2 in. non-valved unisex input and output couplings
Auxiliary
24 Vdc, 10 amp motor
Flow rate: 13 gpm (49.2 lpm) maximum
Nozzle Kit
4
Kit weight:
32 lbs (14.52 Kg)
CCR Nozzle
1
Weight: 10 lbs (4.5 kg)
Assembly
Mil-Spec CCR nozzle with strainer and 2-inch, non-valved unisex inlet
coupling
Limits outlet pressure to 15 psi (1 kg/cm2)
D1 Nozzle
1
Weight : 12 lbs (5.4 kg)
Assembly
Mil-Spec D-1 nozzle with 45 psi (32 kg/cm2) regulator and 2-inch, non-
valved unisex inlet coupling
Fuel and Oil
1
Weight: 9 lbs (4.1 kg)
Servicing Nozzle
Mil-Spec oil servicing nozzle with strainer and 2-inch, non-valved
unisex inlet coupling
0002 00-17
