TM 55-1500-345=23
WORDING
DIRECTIONS
Left and right side of tail boom 4-m. down
from top of skin seam. l-in. aircraft black let-
ters, Arrow head will start at body station 200,
Arrow points aft. paint arrow aircraft black,
#37038.
Aft of 42 degree gearbox cover on left
15
REMOVE TO SERVICE WITH MIL-L-23699 OIL ABOVE
hand side of tail fin, 1/2-in. black letters with
- 32C AMBIENT TEMPERATURE MIL-L-7808 OIL
1/4-in. spacing between top and bottom of
BELOW - 32C AMBIENT TEMPERATURE
each line.
Locate parallel to ground below tail rotor
16
TAIL ROTOR
tie down loop. 1/4-in black letters.
TIE DOWN
Both sides of fin, use 6-in. black letters
17
(Radio call numbers)
with the bottom of the letters on the horizontal
17-in. above tailboom.
Paint tail skid aircraft green, MIL-C-46168.
18
Both sides of aircraft. Most fwd letter (u-left
19
UNITED STATES ARMY
side, Y-right side) to start 2 l/2-in. aft of tail-
boom joint. Top of letters are 9-in. down from
and parallel to top skin seam. Letters to be 6-
in. high lusterless black. Additional dimen-
sions and spacing in accordance with Fig. 8-2.
Locate adjacent to and aft of tie down.
20
TIEDOWN
Forward and aft tie-down fittings. Use 1/4-in.
ALLOWABLE LOAD
2000 LBS
black letters.
1/2-in. black letters 1/4-in. spacing between
21
EXTERNAL
lines.
POWER
Left and right outbd pylon fairigs. 1/2-m.
22
GROUND SAFETY
black letters,1l/8-in. spacing between tines.
PIN ACCESS
Left and right outbd and inbd pylon fairings.
23
HOOK MANUAL
5/8-in. black letters.
RELEASE ACCESS
24
Use l-in. black letters with l/2-in. spacing
U.S. ARMY
between lines,
AH-1 (ADD APPLICABLE MODEL)
U.S. ARMY SERIAL
Figure 9-2. Exterior Markings, AH-1 (Sheet 5 of 10)
Change 5
9-6
