TM 55-1500-345-23
CODE'
WORDING
NO.
DIRECTIONS
1
NO STEP
Locate inner fwd stencils between edge of
wing and synthetic walkway. Inner aft
stencils 2 in. outboard from walkway and 6
in. fwd of trailing edge of wing. Outer
stencils in line with inner stencils. Fwd
stencils to read from fwd looking aft. Aft
stencils to read from aft looking fwd. 1/2 in.
MIL-C-416168, aircraft black No. 37038
letters,
2
NO STEP
Aft edge of cross tubes,1l/2-in. black letters.
3
CAUTION
Locate bottom side. 1/2-in. black letters.
DISCONNECT ELECTRICAL WIRING
BEFORE REMOVING WINGS
4
Top, 2-in. from edges and tip. l/2-in black
NO PUSH
letters.
BATTERY
VENT
5
1/2-in. black letters.
CLOSE
6
Locate aft of handle, Pilot's and Gunner's
canopy door. Arrows to be black 1-1/2 in.
long with l/4-in. shaft and 1/'2-in. arrow
OPEN
head. 1-in, black letters.
7
HAND FIRE
Locate top fwd gunners left hand armor
EXTINGUISHER
plate, 1-in. MIL-C-46168, orange-yellow, No.
INSIDE
33638,
8
Paint broken band on inside pilots and
orange-yellow.
HYD RESERVOIR INSIDE
1/2-iII. black letters, both sides.
ACCESS FOR FIRE
1/2-in. MIL-CA16168, Aircraft Black
No.37038 letters on both sides.
EXTINGUISHING
11
INSTALL SHAFT CLAMPS
Locate inside of top cover ('B.L.O.) approx
INDEXED 90 TO EACH OTHER
adjacent to shaft clamps. l/2-in. aircraft
black letters.
TEE BOLT TYPE 20-25 IN. LB.
THRU BOLT TYPE 30-35 IN. LB.
TAP O.D. OF CLAMP LIGHTLY AND
RETORQUE
12
1/2 in. black letters.
DRIVESHAFT ACCESS
13
RADIO ACCESS
1/2 in. black letters.
Change 5
9-5