TM 55-1500-345-23
CODE
WORDING
NO.
DIRECTIONS
7
STOWAGE
Locate on stowage doors both sides of heli-
copter 1/2-in. aircraft white letters. 4
required.
Paint and stencil both cargo door handles as
8
shown. PULL and SLIDE will be 1-in. aircraft
white letters. Arrow is aircraft white 1.5 in.
long with 1/2 in. arrow head 1/4 in. shaft.
Cargo door window frames will have the com-
9
plete periphery from outside edge of panel to
inside edge, including stud buttons painted
aircraft white. Paint window emergency
mechanism dull black with 3/8 in. orange-
yellow oblique (45) stripes, 1/8 in. spacing
on inboard surface of handle. Arrow head is
1 in. on a 1/2 in. x 3 in. shaft, EMERGENCY
EXIT is 1/2-in. lettering, 4 places.
STRUCTURAL PANEL REQUIRED FOP JACK-
10
Lccated on both sides of fuel access control
ING, TOWING, HOISTING, GROUND RUN
panel and pylon access panel 1/4 in. MIL-C-
AND FLIGHT.
46168, aircraft white, No. 37875 letters, 8
required.
EXIT
11
Locate above cargo door release handles on
RELEASE
sound proofing letters 1-in. aircraft white, 2
required.
TURN
12
Locate inside at cabin door handles, 1/2 in.
aircraft white letters, arrow, 1/4 in. shaft 1 in.
long with 1/2 in. arrow head.
Figure 9-36. Interior Markings, UH1D and UH-1H (Sheet 3 of 4)
9-159
