TM 55-1500-345-23
CODE
DIRECTIONS
NO.
WORDING
C-12, bottom of both wings outboard of nacelles, near
wing center lines, 1/2-in. and 1/4-in. black letters.
CAUTION
RC-12, 1/2-in. and 1/4-in. aircraft black letters
USE CARE WHEN WASHING
WING TO NOT REMOVE ANTI-
C-12 black gloss silkscreen ink. Paint number G2017
25
CORROSIVE GREASE FROM
black gloss (MFG U.S.Paint). RC-12 aircraft black paint
WING ATTACH BOLT
number G2002 (MFG U.S.Paint).
Locate on front side of nose landing gear strut, 1/2-in.
MIC
aircraft black letters.
JACK
26
C-12, top right wing, inboard of nacelle, on access cover,
BATTERY
1/2-in. black letters.
ACCESS
RC-12, 1/2-in. aircraft black letters.
C-12 black gloss silkscreen ink. Paint number G2017
27
black gloss (MFG U.S.Paint). RC-12 aircraft black paint
number G2002 (MFG U.S.Paint).
C-12, locate near fuselage on top of both wings, 3 places
on right wing, 4 places on left wing. 1/2-in black letters.
RC-12, 1/2-in. aircraft black letters.
NO
C-12 black gloss silkscreen ink. Paint number G2017
28
STEP
black gloss (MFG U.S.Paint). RC-12 aircraft black paint
number G2002 (MFG U.S.Paint).
Paint a black ground symbol, dimensions per
C-12 black gloss silkscreen ink. Paint number G2017
black gloss (MFG U.S.Paint). RC-12 aircraft black paint
29
number G2002 (MFG U.S.Paint).
RC-12 Only, Paint wing tip pod
assembly, As required using anti-static epoxy paint, Flat
black, with a transmissivity range of 0.50 to 75 meg
30
ohms resistance per square specification 528-104 with
910-119 w/catalyst.
Figure 10-1. Exterior Markings, C-12 / RC-12 (Sheet 18 of 22)
Change 9
10-19
