TM 55-2840-231-23
2-15.1 Compressor Case Half - Installation - Continued
COMPRESSOR/-
Continued
NOTE
NOTE
When installing the first case
half, apply a thin coat of sealant
(item 51, Appendix D)
to the vertical splitlines. When
installing the second case half,
apply a thin coat of sealant to
the vertical and horizontal
splitlines and immediately
proceed to secure compressor
half before sealant cures.
c. Deleted
d. Deleted
.
To determine locknut drag, run
the nut up snug; then back off
one-half turn. The torque
required to first turn the
loosened nut is locknut drag.
Change 13
2-64.3
