TM 55-2840-231-23
CHAPTER 9
MISCELLANEOUS EQUIPMENT/AIR SYSTEM
This chapter contains procedures for the maintenance and preservation of the miscellaneous
equipment. Paragraphs following outline disassembly, inspection, repair and additional requirements
needed to maintain miscellaneous equipment and related parts. Procedures requiring maintenance on
the Aviation Intermediate Maintenance (AVIM) level are specified and must be performed as such.
Paragraphs in which the maintenance level is not specified shall be considered Aviation Unit
Maintenance (AVUM) and may be performed at this level or a higher level of maintenance.
Miscellaneous Equipment Maintenance Procedures
Anti-Icing Valve Poppet Seat - Replacement
Anti-Icing Valve Poppet Seat - Installation
Anti-Icing Air Valve - Removal
Anti-Icing Air Valve - Testing
Compressor Bleed Valve - Testing
Compressor Bleed Valve - Removal
Compressor Bleed Valve - Installation
9.1 MISCELLANEOUS EQUIPMENT MAINTENANCE PROCEDURES.
9-1
9-2
9-3
9-5
9-6
9-6
9-9
9-10
Visually inspect all subassemblies and accessories removed from the engine. Check for loose or
missing parts. Note any damage or excessive wear. Repair damaged parts where possible. Replace
damaged parts that cannot be repaired. Disassembly procedures provided enable required cleaning,
inspection, repair or replacement of the miscellaneous equipment.
Change 11
9-1
