TM 55-2840-231-23
9-8. Compressor Bleed Valve - Installation
INITIAL SETUP
Applicable Configuration
All
ENGINE/
1. Bleed Valve
Consumable Materials
Lubricating Oil (item 5, Appendix D)
Antiseize Compound (item 6, Appendix D)
Antiseize compound (item 6, Appendix D)
a. Install bleed valve (2)
and new gasket (11) in
mounting flange. Retain
with three nuts (8), bolts
(9), and washers (10).
Apply antiseize compound
to the bolts. The 1/4-28
bolt goes in the left hole
(looking forward).
b. Tighten nut on 1/4-28
bolt to 70-85 in. lb
(0.8-1.0 kg/m) and the
other two nuts to 35-40
in. lb (0.4-0.5 kg/m).
9-10
Change 13
