TM55-2840-251-23
Section IV FUEL PUMP FILTER ELEMENT
6-4 FUEL PUMP FILTER ELEMENT
This task covers:
a.
Removal (6-4-1)
b.
Inspection (6-4-2)
c.
Cleaning (6-4-3)
d.
Installation (6-4-4)
INITIAL SETUP
Applicable Configurations:
All
Tools:
Powerplant Mechanic's Tool Kit
NSN 5180-00-323-4944
Torque Wrench (O to 500 inch-
pounds)
Materials:
Lubricating Oil (E.2) or (E.71)
Lockwire (E.5)
Varsol (E.9)
Parts:
Preformed Packings
Personnel Required:
68B Powerplant Mechanic
References:
TM55-2840-251-23P
General Safety Instructions:
WARNING
LUBRICATING OILS HAZARDOUS
Lubricating Oils (E.2) and
(E.71) contain materials
hazardous to health. They
can cause paralysis if
swallowed. Prolonged
contact with skin can cause
irritation. Fire can
result if exposed to heat
or flames. Use only in
areas with adequate venti-
lation. Wash hands thoroughly
after handling.
TOXIC AND FLAMMABLE SOLVENTS
Solvents used for cleaning
are toxic and flammable.
They irritate skin and
cause burns. Fire can
result from use near heat
or open flame. Use only in
a well-ventilated area. Wear
rubber gloves. In case of
contact, immediately flush
skin or eyes with water for
at least 15 minutes.
GET IMMEDIATE MEDICAL
ATTENTION FOR EYES.
6-15
