TM 55-2840-251-23
8-1 OIL FILTER ELEMENT (Continued)
8-1-1 REMOVAL
1.
Remove four self-locking nuts (1) and plain washers
(2) securing filter cover (3). Remove cover and stepped
teflon spacer (8).
2.
Remove and discard preformed packing (4).
3.
Using Puller (T.33), withdraw filter element (5) from
filter body. Remove and discard preformed packing (6).
4.
On engines with metal filters installed, remove and
discard preformed packing (7).
8-1-2 INSPECTION
Inspect in accordance with Chapter 1, Section VIII,
Paragraph 1-78.
8-1-3 CLEANING
Clean in accordance with Chapter 1, Section VIII,
Paragraph 1-77.
GO TO NEXT PAGE
8-4