TM 55-2840-251-23
8-2 OIL LINES AND FITTINGS (Continued)
8-2-1 REMOVAL
WARNING
LUBRICATING OILS HAZARDOUS
Lubricating Oils (E.2) and (E.71) contain
materials hazardous to health. They can cause
paralysis if swallowed. Prolonged contact with
skin can cause irritation. Fire can result if
exposed to heat or flames.
Use only in areas with adequate ventilation.
Wash hands thoroughly after handling.
CAUTION
All pressure and scavenge oil tubes must be
handled with care. When tubes and fittings are
removed from the engine, they must be capped
and individually labeled to facilitate
reinstallation.
1.
Cut lockwire and remove bolts (32) and plain washers
(33) securing reduction gearbox elbow (34) to boss on
gearbox case.
2.
Remove self-locking nuts (25), washers (26) and
deeheaded bolts (27) securing oil transfer coupling
assembly (28) to flange C.
3.
Withdraw reduction gearbox elbow (34) from gearbox
case. Remove and discard preformed packing (35).
GO TO NEXT PAGE
8-8