TM55-2840-251-23
10-7 REAR FIRESEAL MOUNT RING (Continued)
10-7-4
INSTALLATION
1.
Install plate (10), bolts (9), washers (8) and nuts
(7).
2.
Loosely install fireseal halves (5) and (6), bolts (4)
and washers (3).
3.
Install bolts (2) and nuts (1).
4.
Torque nuts (3) and (7) to 32 to 36 inch-pounds.
5.
Install fuel pressure tube, nut and washer (Task 6-
11-4).
6.
Connect P3 pressure tube (Task 10-4-5 or 10-4-6,
as appropriate).
7.
Install union and power turbine sensing tube (Task
10-4-5 or 10-4-6, as appropriate).
8.
Install reversing linkage, wire rope, casing and
clevis (Task 10-3-3).
9.
Install oil pressure and scavenge tubes, seals and
plates (Task 8-2-5).
FOLLOW ON MAINTENANCE:
None
END OF TASK
10-45/(10-46 blank)
