TM55-2840-251-23
10-6
CENTER FIRESEAL MOUNT RING (Contin ued)
10-6-4
INSTALLATION
1.
Install brackets (14), bolts (15) and nuts (13).
Torque nuts to 32 to 36 inch-pounds.
2.
Install plugs (12) and nuts (11). Torque nuts to 32
to 36 inch-pounds.
3.
Install plates (9), bolts (10) and nuts (8). Torque
nuts to 32 to 36 inch-pounds.
4.
Loosely install fireseal halves (6) and (7), bolts (5)
and nuts (4). Torque nuts (4) to 32 to 36 inch-pounds.
5.
Install bolts (1), washers (3) and nuts (2). Torque
nuts to 32 to 36 inch-pounds.
6.
Install ignition cable assemblies (Task 7-4-4).
7.
Install fuel pressure tube at center fireseal mount
ring (Task 6-11-4).
8.
Install pressure and scavenge oil tubes, seals and
plates (Task 8-2-5).
9.
Install reversing wire rope and linkage (Task 10-3-
3).
10.
Install power turbine governor sensing tube and
union (Task 10-4-5 or 10-4-6, as appropriate).
11.
Install P3 elbow and tube (Task 10-4-5 or 10-4-6,
as appropriate).
FOLLOW ON MAINTENANCE:
None
END OF TASK
10-40
