TM 55-2840-254-23
2-30.1 INSTALL RTV IN FIRST STAGE STATOR VANE ASSEMBLY (Continued)
2-30.1
Remove stator vane assembly.
(Ref. Task 2-26).
File shroud ends (14). Use flat hand
file.
Clean stator vane assembly. (Ref.
Task 2-27).
Install stator vane assembly (steps
1 thru 7).
Repeat steps 8. a. thru e.
If non-lead gear marking com-
pound is still visible, repeat step
3.h., (3), (a) thru (f).
Wear gloves (E20). Using dry clean-
ing solvent (E17) and brush, clean off
all non-lead gear marking compound.
Wipe dry using lint-free cloth (E26).
GO TO NEXT PAGE
Change
5
2-254.9