TM 55-2840-254-23
2-48 REMOVE OUTPUT SHAFT SEAL AND HOUSING ASSEMBLY (Continued)
2-48
In following step 3., be sure to remove
output shaft seal and housing assembly
carefully and evenly. Carbon
elements inside seals could easily
break. This would result in oil
leakage and damage to engine.
3. Tighten three handling tools (T16) (2) evenly.
Separate output shaft-seal and housing assem-
bly (4) from inlet housing cover assembly (5).
Remove output shaft seal and housing assembly
(4), shim (6) and two packings (7). Remove
three handling tools (T16) (2).
GO TO NEXT PAGE
2-434
