TM 55-2840-254-23
2-48
REMOVE OUTPUT SHAFT SEAL AND HOUSING ASSEMBLY (Continued)
2-48
In following step 3, be sure to remove output
shaft seal and housing assembly
carefully
and
evenly.
Carbon
elements inside seals could easily
break. This would result in oil
leakage and damage to engine.
3.
Tighten three handling tools (T16) or (T17) (2)
evenly. Separate output shaft seal and housing
assembly (4) from inlet housing cover assembly
(5).
4.
Remove output shaft seal and housing assembly (4),
shim (6) and two packings (7). Remove three
handling tools (T16) or (T17) (2).
GO TO NEXT PAGE
2-434 Change 6