TM 55-2840-254-22
2-60 CLEAN OUTPUT SHAFT SUPPORT HOUSING (AVIM) (Continued)
2-60
2. Clean oil filter element (4) and housing assem-
bly (5) as follows:
a. Immerse oil filter element (4) in dry cleaning
solvent (E17) and agitate. Use brush on inner
surfaces.
b. Clean housing assembly (5) with dry cleaning
solvent (E17). Use brush on inner surfaces.
c. Blow dry parts. Use clean, dry compressed air.
3. Clean bearing housing liner (6) and overspeed
gear assembly (7)
as follows:
a. Clean bearing housing liner (6) and overspead
gear assembly (7) with dry cleaning solvent
(E17). Use brush on inner surfaces.
b. Blow dry parts. Use clean, dry compressed air.
GO TO NEXT PAGE
2-479
