TM 55-2840-254-23
2-72 INSTALL NO. 3 BEARING PACKAGE (AVIM) (Continued)
2-72
8. Remove two slave bolts and washers.
9. Install first alignment pin (T2) (12) into bolt
hole through inlet housing inner flange (13)
and compressor rotor front bearing housing at
the 11-oclock position.
10. Install second alignment pin (T2) (12) at the
5-oclock position.
11. Position shim (10) with two widely spaced
holes (14) at 7-oclock and 10-oclock location.
Align holes (14) with two widely spaced holes
(15) on inlet housing inner flange (13).
12. Install shim (10) over alignment pins (T2) (12).
GO TO NEXT PAGE
2-519