TM 55-2840-254-23
3-9 DISASSEMBLE COMBUSTION SECTION (AVIM) (Continued)
3-9
1. Locate smallest vane segment (1) at 8-o’clock
position. Use fuel drain valve (2), located at
6-o’clock position, for reference.
2. Matchmark vane segment (1) to combustion
chamber housing (3) with one mark (4). Use
marking pencil (E34).
3. Matchmark vane segment (5), located at 5-
o’clock position to combustion chamber hous-
ing (3) with two marks (6). Use marking pencil
(E34).
4. Matchmark vane segment (7), located at 2-
o’clock position, to combustion chamber hous-
ing (3) with three marks (8). Use marking pen-
cil (E34).
5. Matchmark vane segment (9), located at 10-
o’clock position, to combustion chamber hous-
ing (3) with four marks (10). Use marking pen-
cil (E34).
GO TO NEXT PAGE
3-152
