TM 55-2840-254-23
4-37
REMOVE NO. 4 AND 5 BEARING PACKAGE SEALS (AVIM) (Continued)
4-37
3. Using helper, install torque multipler (T63)
(9) as follows:
a. Install drive bar (10) and position torque
multiplier (T63) (9) over drive bar (10).
b. Align two pins (1 1) with holes (12) in hold-
ing fixture (6). Place torque multiplier (T63)
(9) on holding fixture (6).
GO TO NEXT PAGE
4-187
